WUXI WANLI ADHESION MATERIALS CO., LTD.
Bond the world together
Add to Cart
Good Quality Factory Directly WANLI® TPR-433 PSA Hot Melt Adhesive with Viscosity About 10000mpa·s (160℃) for Thermal Paper Label Bonding Application
Wanli® pressure sensitive hot melt adhesive TPR-433 for label is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-433 is specifically developed for many kinds of label bonding. TPR-433 is featured high viscosity, high peeling strength, good aging resistance. Suitable working on standard machine systems such as slit squeegee, roller glue, spray glue etc.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-433 is used for many kinds of label bonding.
| Application Material | Thermal Paper Label Bonding Hot Melt Adhesives |
| Appearance | Yellow Block Solid |
| Component | TPR |
| Application Industry | Label Bonding |
| Solid Content | 100% |
| Operating Temperature | 150～180 ℃( Depend On Equipment, Substrate, Environment And Other Conditions) |
| Softening Temperature | About 99 ℃ |
| Melt Viscosity | About 10000mpa·s (@160℃) |
| Ball Initial Viscosity | About 10# (Measured at 23 ℃ and 35g/ m2 on PET) |
| Peeling @180˚ | About 15.0N/2.5cm/ Stainless Steel Plate |
| Usage Scope | Thermal Paper Label Bonding |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-433 is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store Wanli® PSA TPR-433 where it’s dry, cool and avoid direct sunlight. The storage temperature should be not more than 35℃ and away from open fire or heat source.
