WUXI WANLI ADHESION MATERIALS CO., LTD.
Bond the world together
Add to Cart
Factory Direct High Quality WANLI® PSA Hot Melt Adhesive TPR-2002A with Viscosity About 5000 mpa·s (180℃) for RFID(Radio Frequency Identification) Label Application
Wanli® pressure sensitive hot melt adhesive TPR-2002A for RFID label is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-2002A is specifically developed for RFID label and adhesive tape. TPR-2002A is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-2002A is used for RFID(radio frequency identification) label and adhesive tape.
| Application Material | RFID(Radio Frequency Identification) Label |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | RFID(Radio Frequency Identification) Label |
| Solid Content | 100% |
| Operating Temperature | 160℃～180 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature | Around 110 ℃ |
| Melt Viscosity | Around 5000 mpa·s (180℃) |
| Ring Initial Viscosity | Around 30N/2.5cm/ Stainless Steel Plate (Measured at 23 ℃ and 45g/ m2 on PET) |
| Peeling @180˚ | Around 25.0N/2.5cm/ Stainless Steel Plate |
| Usage Scope | RFID(Radio Frequency Identification) Label and Adhesive Tape |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-2002A is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
